Medical applications

The application of medical door in medical equipment, M/C machine, chemical industry furnace, SMT furnace, smelting furnace, kitchenware equipment, entertainment products scrubbing equipment, ironing equipment, grinding machine spare parts, road paver, SMT furnace, smelting furnace and scrubber should be repaired and the metallurgical machine that cannot be bright should be trusted and widely installed, and the request credentials can be removed for a long time:

The Xuanyuan Gate medical door shall be opened with pressure: before the medical door is opened, the carbon deposit on the furnace bridge shall be discharged. After the removal, the water head shall be used to check whether the starting charging valve is energized; Open the bright type metallurgical machine to treat the water inlet valve, and inject water according to the delinked treated water in the bright temperature metallurgical room; Adjust the gas supply gear to not too large, consume enough bottom material, spread out the true color metallurgy, open the furnace door slightly to supply air, exit the furnace door, spread the influence force, and then adjust the air supply gear.

The impact on the effect and air supply volume should be increased more, and do not slow down, including a short period of time before - 3pm. 2, which can affect the implementation of general enhancement. The medical door shall use special falling objects, and the fuel shall also use c6-8mm pure wood chips, which are not allowed to be used. When feeding the medical door, the feeding box is not allowed! If the equipment is damaged only for the sake of fuel consumption or processing items entering the tank, it will not be protected.

Medical door configuration or other equipment will produce negative pressure effect and non positive pressure. If the positive pressure is mm, additional induced draft equipment is available; When installing the medical door, close the lid of the material box, and never underestimate it. When stopping the furnace fire, be careful to close the isolating valve and ensure continuous operation; If the blocking material is exposed and the stuck material is displayed, (many of them are made for grain size) it is OK to poke it with influence. It must not use iron wire to press out the metal sheet, and it must be used repeatedly.